NP100
    Specs
 
 
    

NP100 Specifications

• Power: If SA-12 is used as basis for upgrade, 85W/8 ohms, 140W/4 ohms; if SA-100 is used as basis for upgrade, 100W/8 ohms, 170W/4 ohm.
• Frequency Response: 1Hz to 75kHz (-3dB)
• Signal-to-noise: 88dB, 400-22kHz, ref 1W
• Sensitivity: If SA-12 is used as basis for upgrade, .22V/1W/8 ohm, 2.0V to full power; if SA-100 is used as basis for upgrade, .22V/1W/8 ohm, 2.2V to full power.
• Output Impedance: 0.085 ohm
• Damping Factor: 95 ref 8 ohm
• Power Consumption at idle: 120W
  .

Back